The JT5 6 cylinder
E-Type kit fits both 3.8L and 4.2L platforms. It is our most popular kit
with over 1200 installations.The 6 cylinder kit uses the Model S gearbox
as the base platform. The kit includes the gearbox, shifter, knob, mount,
driveshaft flange,driveshaft and clutch disc. A new heavy duty bellhousing is supplied.
It is
a proven gearbox and is suited for street use and racing where synchros
are required. These are not built from existing transmissions as others
do. They are built from all new parts and blueprinted for performance.
Rick Korn's
( Bothell, WA ) Stock JT5 in an E-Type
|
Ron Evan's
( Largo FL ) Stock JT5 in a FHC |
Factory bellhousing
heights are maintained . This allows use of both 9.5" and 10"
factory clutches, release bearings, forks and slave cylinders. Beware,
since copycat companies don't offer this.The factory clutch is maintained
using our new disc. Factory hydraulics and linkage remain stock and unchanged.
All mounts use the same location points as the factory. Factory pilot
bushing is maintained. Some peening of the floor pan may be required to
clear the upper ears of the transmission. This does not effect the interior
in any way. Short throw shifter is in exact location as factory shifter
. Factory speedometer angle drive and cable screw onto the transmission. DO NOT USE AN ALLOY FLYWHEEL WITH THIS TRANSMISSION.
Dan Ligas
( Largo, FL ) JT5 interior view |
- The
shifter comes out in the exact location as the factory 4 speed
- The
shifter maintains factory height and throw
- No
need to change the factory throw out bearing
- No
need to change the factory pilot bushing
- No
need to replace the factory slave cylinder push rod to a shorter
rod
- Factory
9.5" and 10" clutches can be used
- Factory
flywheels can be used with NO modifications
- No
need to alter or replace console
- No
need to alter or replace the tunnel cover
- Race
and Road proven design since 1995
- New
driveshaft included
- Stronger than any conversion on the market.
|
JT5 E-Type 5 Speed Conversion Kit for the 4.2 or 3.8 Engine |
Ratios Offered:
- 2.95 1.94
1.34 1.00 .90 ( Model CR only )
- 2.95 1.94
1.34 1.00 .63
- 2.95 1.94
1.34 1.00 .73
- 2.95 1.94
1.34 1.00 .80
- 3.35 1.99
1.33 1.00 .68
- 3.35 1.99
1.33 1.00 .73
- 3.35 1.99
1.33 1.00 .83
- 3.35 1.99
1.33 1.00 .90
Price: $4895.00
plus shipping. Purchase
Online
|
JT5 5
Speed getting installed in a Series II E-Type.
Executive Motor Works - Deerfield Beach, FL |
|