Super661 Transmission Parts

The Super661 195-4529A mount solves the solution for mounting a Hurst shifter in a 1967 - 1968 Camar..

The M10618 Hurst shifter adjusting nut replaces OEM sliding nuts using a 3/8-16 thread in factory 19..

The Super661 1950164-BBK-32 mount solves the solution of using a larger late model Super T10 or Munc..

The Super661 1950164A mount can replace the fixed position 1950164 Hurst mount included in Hurst ins..

The Super661 S3300044  design reinforcement plate was originally equipped on Z3 model..

Made is USA.  This is an oilite bushing and is non magnetic. Made to OEM specification. &n..

Our Heavy duty "coiled" roll pin can have almost double the sheer strength compared to standard slot..

The 1310-1600 driveshaft yoke is for applications that require a 16 spline yoke in T10 4 speed and P..

This 3R SERIES slip yoke fits GM transmissions with a 27 spline output shaft. It is used with drives..

This 3R SERIES slip yoke fits GM transmissions with a 32 spline output shaft. It is used with d..

The new WT296-21  2nd gear is for all close ratio Toploader 4 speed transmissions that have a 2..

The new WT296-21A  2nd gear is for all wide ratio Toploader 4 speed transmissions that have a 3..

The new WT296-11A  3rd gear is for all wide ratio Toploader 4 speed transmissions that have a 2..

Our H11 seal incoporates a short dust boot to prolong seal life. This is was used in all 25 and 28 s..

Our H12 seal incoporates a short dust boot to prolong seal life. This is was used in all 31 spline F..